Airmighty #07

Airmighty #07 is here!
Limited edition cover for 10 fastest buyers.

normal cover for the rest

both looks stunning if u ask me!
email or call me now +6019-9599999

Among the highlights are Yanto Widodo's Type 147 Fridolin. Done by Terror Garage, Bandung.
Slammed with 15x6 Fuchs!

Oldspeed Hebmuller

Japanese Razor

Badcamberg 2011 coverage

Update @13MAR12

It appears that i've not been updating here.
Here goes the list of work done all this while.

Oil cooler adapter stainless steel braided (SSB) hose

Oil cooler relocated to the LH side of the GB

MSD distributor, 6AL2, 8.5mm super conductor cables, firewall feed thru, wire separator/organizer, blaster SS coil

firewall feed thru mounted thru 1" hole

Oily clutch plate (stock sachs 200mm)

plate was relined with copper woven organic

Balanced clutch cover. stock sachs 200mm

changed engine and GB mounts

also steering damper (cofap)

Polish the internal of the intake manifolds

and tap for servo vacum line

weld a new bung to the fuel tank

SSB fuel line

facet fuel pump and filter configuration

refurbed DRLA40

test fitted

engine washed. dirt and grimes are cleaned

Scat 1.5qt oil sump fitted together with billet sump cover.

old vs new shifter coupling

new shifter coupler

30mm CB pump for full flow

comparison between empi meiling and CB pump (schadek)

bugpack oil filter adapter

and lastly, as of today

today m gonna fit the MSDs in. hopefully can get everything running and start the car today.

Current work @26JAN12

Front brake is done.

Balljoints, track arm bushes and tie rod ends are replaced with OEM.

Most shops are still closed for CNY celebration.
Thus my steel braided hoses/lines are on hold.
Only the rear brake was done before.

Next are fuel lines and oil cooler hoses.
Tanks are already out and A/C is scheduled to go.

Little progress

Disc brake is now done. Might have to flare the rear fender a lil bit to accomodate the wheels. In the midst of redoing all fuel and oil lines with steel braided hose. pix will folllow.